Duplo DB-200 Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Bindownica Duplo DB-200. Duplo DB-200 18 stron. Perfect binder

After the first notching process, the clamp

station will remain to the left side of DB-250

and the LED display of the control panel will

display and flash "LOAD COVER".

Center the cover sheet and adjust the side guide:

Measure the width of the book plus half the

thickness of the spine. Then set side guide

accordingly.

Place the cover on the nipping station, the

"START" LED will be lit and flashing "PUSH

START". Then press the "START" button to

move the clamp station over the nipping station

starting the binding process for the book block

and cover sheet.

Note:

If you accidentally remove or drop the cover

sheet during the clamping station returning to

the nipping station, the control panel will show

"COVER?". At this moment, you have to place

the cover on the nipping station and press

"START" button to resume the process.

When the display indicates "PUSH OPEN",

press the "OPEN" button to open the clamps.

Then, remove the finished book from the right

end of the clamp station.

Having completed one bound book, the LED

display of control panel will count once for the

total binding amount as shown.

Then the control panel will display and flash

"LOAD BOOK" for binding next book.

Repeat step 1 to 5 for more books in

"MANUAL" operation.