aevit SMART-SHIFT Instrukcja instalacji - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria samochodowe aevit SMART-SHIFT. aevit SMART-SHIFT 16 stron.

HONDA ODYSSEY (2008-2010)

BRACKET

Attach the Cable Bracket (included in KIT-SS-ASSY-

04T) to the end of the Smart Shift bracket in the

location shown in the figures above. The flat side of

the bracket should be facing away from the actuator.

Secure this bracket using the (2) provided #10-32 x

3/8" button head screws and a small amount of Blue

Loctite®.

Secure the shift cable to the Smart Shift by sliding

the end of the OEM cable onto the Cable Bracket and

rotating.

CABLE

2008-2010 HONDA

ODYSSEY

OEM shift cable connector

Smart Shift pin

Insert the Smart-Shift pin (included in KIT-SS-ASSY-

04T) through the OEM shift cable connector. Using

the provided #6-32 x 3/8" button head screw, attach

the pin to the actuator Nose Cone as shown using a

small amount of Blue Loctite®.

Retaining Clip

OEM Shift Cable Con-

nector

After calibration (see Section 3), verify that the

vehicle is in Park. The shift cable should fit into the

OEM cable connector that is already mounted on

the Smart Shift Nose Cone. Once in place, secure the

cable to the connector by sliding the retaining clip

over the OEM cable and sliding the lock over the

retaining clip.

Retaining Clip Lock

OEM Shift Cable

SMART-SHIFT INSTALLATION