aevit SMART-SHIFT Instrukcja instalacji - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria samochodowe aevit SMART-SHIFT. aevit SMART-SHIFT 16 stron.

HONDA ODYSSEY (2011-2017)

CABLE

BRACKET

Attach the Cable Bracket (included in KIT-SS-ASSY-

04T) to the end of the Smart Shift bracket in the

location shown in the figures above. The flat side of

the bracket should be facing away from the actuator.

Secure this bracket using the (2) provided #10-32 x

3/8" button head screws and a small amount of Blue

Loctite®.

Secure the shift cable to the Smart Shift by sliding

the end of the OEM cable onto the Cable Bracket and

rotating.

2011-2017

HONDA ODYSSEY

Drill out the nose cone hole to 5/16". Using a 5/16" x

3/4" long button head bolt and 5/16" lock nut, test

fit the OEM shifter cable to the to the actuator Nose

Cone as shown. Hint: Use the 3/8" hole directly be-

neath the Nose Cone to gain access to the underside

of the Nose Cone in order to insert and tighten the

screw as shown.

After calibration (see Section 3), verify that the

vehicle is in Park. The shift cable should be secured

to the Nose Cone using the 5/16" x 3/4" long button

head bolt and 5/16" lock nut.

OEM shift cable connector

SMART-SHIFT INSTALLATION