Contacta HLD3 Instrukcja instalacji i obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Aparat słuchowy Contacta HLD3. Contacta HLD3 12 stron. Hearing loop driver (hld)
Również dla Contacta HLD3: Instrukcja instalacji (9 strony), Instrukcja obsługi i konserwacji (3 strony), Instrukcja instalacji (9 strony)

Hearing Loop Driver Rear Panel

1. Power

2. Hearing Loop Connection

3. Optical/Digital In

4. High Frequency Compensation

Optical Cable

If your television/sound source has an optical output available, use the

optical cable to connect it to the driver's Optical/Digital In (3 in the

diagram above). The Line Out jack (5 in the diagram above) is driven

only from the optical cable input. The HLD3 accepts PCM digital audio.

HLD3

Auxiliary Cable

If your television/sound source doesn't have an optical output

available, use the auxiliary cable to connect it to the driver's Line In (6

in the diagram above).

HLD3

High Frequency Compensation

Metal loss occurs when a large amount of metal in the surrounding

area affects your hearing loop's higher audio tones. To adjust for this,

turn the HF Comp adjuster (4 in the diagram above) clockwise until the

higher pitched sounds are at a suitable strength.

5. Line Out (only follows signal

from the Optical/Digital In)

6. Line In

7. Microphone

TV/Sound

Source

TV/Sound

Source