Contacta HLD3 설치 및 사용자 설명서 - 페이지 8

{카테고리_이름} Contacta HLD3에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Contacta HLD3 12 페이지. Hearing loop driver (hld)
Contacta HLD3에 대해서도 마찬가지입니다: 설치 매뉴얼 (9 페이지), 운영 및 유지보수 매뉴얼 (3 페이지), 설치 매뉴얼 (9 페이지)

페이지 인쇄
Contacta HLD3 설치 및 사용자 설명서

Hearing Loop Driver Rear Panel

1
1. Power
2. Hearing Loop Connection
3. Optical/Digital In
4. High Frequency Compensation
Optical Cable
If your television/sound source has an optical output available, use the
optical cable to connect it to the driver's Optical/Digital In (3 in the
diagram above). The Line Out jack (5 in the diagram above) is driven
only from the optical cable input. The HLD3 accepts PCM digital audio.
HLD3
Auxiliary Cable
If your television/sound source doesn't have an optical output
available, use the auxiliary cable to connect it to the driver's Line In (6
in the diagram above).
HLD3
High Frequency Compensation
Metal loss occurs when a large amount of metal in the surrounding
area affects your hearing loop's higher audio tones. To adjust for this,
turn the HF Comp adjuster (4 in the diagram above) clockwise until the
higher pitched sounds are at a suitable strength.
8
2
5
3
4
5. Line Out (only follows signal
from the Optical/Digital In)
6. Line In
7. Microphone
6
7
TV/Sound
Source
TV/Sound
Source