Contacta HLD3 설치 및 사용자 설명서 - 페이지 9
{카테고리_이름} Contacta HLD3에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Contacta HLD3 12 페이지. Hearing loop driver (hld)
Contacta HLD3에 대해서도 마찬가지입니다: 설치 매뉴얼 (9 페이지), 운영 및 유지보수 매뉴얼 (3 페이지), 설치 매뉴얼 (9 페이지)
페이지 인쇄
1.
To turn on the HLD3, turn the volume control knob (on the right of
the front panel) clockwise until the power indicator lights up.
2. Move to the position of the hearing loop. If using a hearing loop
pad, sit on the chair with the pad installed underneath.
3. Switch the hearing device to the "T" position or turn on the loop
listener, then turn on the audio source.
4. Audio is picked up by the telecoil in the hearing device.
5. Adjust the volume on the hearing loop driver as necessary. The
audio source volume control will not change the volume heard by
the hearing device.
There's nothing more you need to do!
7. Turn the volume control knob anti-clockwise until it clicks to power
off when the Home Loop is not being used.
To keep the system at its peak performance, the following procedures
should be carried out on a regular basis:
•
Ensure all connectors are firmly inserted into their sockets.
•
Do not stretch cables.
•
Clean the driver and the microphone with a dry soft cloth/
cleansing wipes. Do not use solvent based cleaners.
•
Do not allow cleaning fluids to enter the driver or back ports/vents
of the microphone.
Using the System
Maintenance
9