Contacta HLD3 Kurulum ve Kullanım Kılavuzu - Sayfa 9
İşitme Cihazı Contacta HLD3 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. Contacta HLD3 12 sayfaları. Hearing loop driver (hld)
Ayrıca Contacta HLD3 için: Kurulum Kılavuzu (9 sayfalar), Kullanım ve Bakım Kılavuzu (3 sayfalar), Kurulum Kılavuzu (9 sayfalar)
Sayfayı Yazdır
1.
To turn on the HLD3, turn the volume control knob (on the right of
the front panel) clockwise until the power indicator lights up.
2. Move to the position of the hearing loop. If using a hearing loop
pad, sit on the chair with the pad installed underneath.
3. Switch the hearing device to the "T" position or turn on the loop
listener, then turn on the audio source.
4. Audio is picked up by the telecoil in the hearing device.
5. Adjust the volume on the hearing loop driver as necessary. The
audio source volume control will not change the volume heard by
the hearing device.
There's nothing more you need to do!
7. Turn the volume control knob anti-clockwise until it clicks to power
off when the Home Loop is not being used.
To keep the system at its peak performance, the following procedures
should be carried out on a regular basis:
•
Ensure all connectors are firmly inserted into their sockets.
•
Do not stretch cables.
•
Clean the driver and the microphone with a dry soft cloth/
cleansing wipes. Do not use solvent based cleaners.
•
Do not allow cleaning fluids to enter the driver or back ports/vents
of the microphone.
Using the System
Maintenance
9