Contacta PLALS-V Instrukcja konfiguracji - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja konfiguracji dla Wzmacniacz Contacta PLALS-V. Contacta PLALS-V 8 stron. Portable large area loop

Installation & Testing Instructions
Note: Consult the provided Chord NU2 Multi-Frequency Receiver and
V7 Hearing Loop Driver's user guides if instructions are required.
1.
Run the provided hearing loop cable around the area you wish to
loop, ensuring that it is taped down securely. Do not leave any
trailing leads that may cause a trip hazard.
2. Connect the hearing loop cable to the loop input connector on the
rear of the Portable Large Area Loop.
3. Unpack the 2 aerials from the accessory pouch. Connect them to
aerial connection #1 and #2 on the front of the Portable Large Area
Loop.
4. Connect both the V7 power supply and the Chord NU2 power
supply to their respective power supply inputs on the rear of the
Portable Large Area Loop; then connect the power supplies to a
mains power source.
5. Power on the Chord NU2 Multi-Frequency Receiver.
6. Unpack the Handheld Microphone from the accessory pouch and
turn the power on. The Channel A/B "RF" LED on the Chord NU2
will light up once the Handheld Microphone has been powered on.
7. Unpack the Loop Listener from the accessory pouch and turn the
power on. Connect it to the provided headphones.
8. While using the Loop Listener, speak into the Handheld
Microphone. Ensure the signal strength of the hearing loop meets
requirements.
9. If necessary, adjust the signal strength of the hearing loop using
the V7 Hearing Loop Driver to achieve required levels. For detailed
instructions, consult the provided V7 user guide.
10. Installation and testing is now complete.
5