Audiotrak AUDIOTRAK Prodigy HD2 Podręcznik użytkownika - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Akcesoria Audiotrak AUDIOTRAK Prodigy HD2. Audiotrak AUDIOTRAK Prodigy HD2 19 stron. High-end 192 khz reference hifi audio interface

Drukuj stronę

1. Hardware Installation

AUDIOTRAK

Prodigy HD2

Figure 4. Removing the PCI Slot faceplate

If the PCI slot is covered by a faceplate, you can remove it by removing the screw holding it in

place or by prying it off with a screwdriver.

Insert the Prodigy HD2 card into the PCI slot, firmly pushing the card into the slot until it is seated

securely. Replace the screw, and tighten it.

Figure 5. Prodigy HD2 installed in a PCI slot

4. Close the computer case.

5. Software Installation

After completing the hardware installation, you need to install the Windows driver. The installation

steps in the different versions of Windows vary, but they are typically very similar.

Note: Depending on your system, you may need the Windows installation CD.