DAPAudio PA-1209 Podręcznik - Strona 11

Przeglądaj online lub pobierz pdf Podręcznik dla Wzmacniacz DAPAudio PA-1209. DAPAudio PA-1209 15 stron.

Example 2: using the 4Ω output with four 4Ω speakers

Example 3: using the 8Ω output with two 4Ω speakers.

In a low impedance system, the total speakerload should always match the amplifier

impedance This to avoid overloading the amplifier. The total speaker power should be at least

the power of the amplifier to avoid damage to the speakers.

High impedance outputs

If using either the 70V outputs or the 100V outputs, note that all speakers should be wired in parallel.

The total power of all speakers summed together should never exceed the total power of the

amplifier in a high impedance (70V or 100V) system!

Fig. 6

Fig. 7