DAPAudio PA-1209 Manuel - Sayfa 11

Amplifikatör DAPAudio PA-1209 için çevrimiçi göz atın veya pdf Manuel indirin. DAPAudio PA-1209 15 sayfaları.

Example 2: using the 4Ω output with four 4Ω speakers

Example 3: using the 8Ω output with two 4Ω speakers.

In a low impedance system, the total speakerload should always match the amplifier

impedance This to avoid overloading the amplifier. The total speaker power should be at least

the power of the amplifier to avoid damage to the speakers.

High impedance outputs

If using either the 70V outputs or the 100V outputs, note that all speakers should be wired in parallel.

The total power of all speakers summed together should never exceed the total power of the

amplifier in a high impedance (70V or 100V) system!

Fig. 6

Fig. 7