DuraVent Hepa Tower Instrukcja instalacji i obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Systemy filtracji wody DuraVent Hepa Tower. DuraVent Hepa Tower 12 stron.

HEPA TOWER SPECIFICATIONS

Dimensions:

77 3/8" High x 27" Wide x 20 3/8" Deep

Weight:

172 lbs

Electrical:

120VAC, 60 Hz, Single Phase, 2.5A

Tested Airflow:

62 / 940 CFM (Low / High)

Tested Power:

10 / 272 Watts (Low / High)

Tested Noise*:

42 / 59 dBa (Low / High)

Controls:

Low Voltage, Digital Touch Controller, Optional Wireless Remote.

Speed Settings:

Timer:

12 Hours, in increments of 1 Hour.

Warranty:

3 years mechanical & structural parts, 1 year control parts.

* Tested at 45° and 1 meter from source

MAINTENANCE

• Replace The Tower's Pre-Filter every 2-3 Months.

Actual Size: 23 3/8" x 23 3/8" x 1 3/4" (or 3/4") MERV11 Filter.

• Check HEPA Filter airflow and visually check Filter surface (do not touch) to determine when

needing replacement. Estimate 2-3 years depending on conditions.

Actual Size: 23 3/8" x 23 3/8" x 12" (H13) HEPA-Filter.

NOTE: Consider a used HEPA Filter "contaminated" and discard with care!

• Clean exterior paneling / wheels using mild soap and a clean cloth.

• Visually inspect the unit, wheels, paneling, air-inlet grille and air-exit louver for proper

functioning and fit.

HEPA TOWER Installation and Operation Manual, 03-15-2021

Page 7