4B Shade 2 Instrukcja instalacji - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria samochodowe 4B Shade 2. 4B Shade 2 8 stron.

Drukuj stronę
4B SHADE II
MICRO SCREW
2
4
5
4B SHADE AUSTRALIA takes no responsibility for any damage to property or personal injury caused
Please ensure that you read all installation instructions prior to installation.
4B SHADE AUSTRALIA reserves the right to update or change components ongoing.
4B Shade components have a 12 month warranty subject to correct installation.
4B SHADE II
1
Cassette consisting of 'Hood', Base, 2 sides and internal brackets.
2
Fabric. GL 1000 Super gloss PVC. Standard colour 'Sand'. Translucent.
3
Bottom Rail with colour toned handle, (connects to inner Tube '8) includes end plugs.
4
Spring Tensioning Tool – CAUTION – spring under tension, read all instructions
prior to re-installing fabric.
5
Cassette fixtures. 6mm drill bit required.
6
Tubing fixtures – U bracket (zinc plated) – 6mm drill bit required.
7
Outer Tubes - Zinc coated steel with plugged end.
8
Inner Tube – 20x20 3mm Aluminium.
9
Inner tube fixtures – Bolt, nut and end cap cover. 8mm drill bit required to drill hole
in Bottom Rail '3' once correct spacing is established.
10
Inner tube holding pins. Pre drilled holes 1800mm from Bottom Rail.
Use pins if necessary to hold the 4B Shade out on mildly windy days.
1
3
through incorrect installation by the purchaser.
Components
.1.
6
MICRO SCREW
Additional 2 U Brackets
and fixtures (6) required
7
If fitting Cassette (1)
direct onto Outer Tubes (7)
8
9
10