4B Shade 2 Instrukcja instalacji - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria samochodowe 4B Shade 2. 4B Shade 2 8 stron.

4B SHADE II

OH&S – The following step requires tensioning the fabric spring and can cause injury.

Safety Glasses must be worn and keep area clear of other persons.

Re-installing the Fabric and Cassette Hood.

Carefully reinstall the fabric tube placing the RHS pin into the end bracket.

Pull out the 1

Spring section to reveal the 'Booster Spring

Turn the Booster Spring CLOCKWISE 12 turns then reinstall Booster Spring back into tube.

Now using the Tensioning Tool Provided – wind up the Tongue of the spring 12 turns CLOCKWISE,

then place into the Spring Bracket.

NOTE – The spring may partly slide out of the tube when winding up – push the spring back into the tube

each turn if necessary.

Reinstall the cassette Hood – Lifting at an angle – slotting in the rear lip into the base channel.

NOTE - A gentle tap each end will assist in locking down the hood!

Reinstall the micro screws each side to secure the hood.

FIG. 'C'

FIG. 'G'

SPRING UNDER TENSION

WEAR PROTECTIVE SAFETY GLASSES

The Winding Tool may dislodge from the spring.

(FIG.E, F & G)

FIG. 'D'

FIG. 'F'

SPRING BRACKET

.5.

(FIG. D)

NOTE – Spring must remain on the Left Hand Side.

(FIG.H)

BOOSTER SPRING

(FIG. C)

FIG. 'E'

FIG. 'H'