Daspi LINEA Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Otwieracz drzwi garażowych Daspi LINEA. Daspi LINEA 13 stron. Swing gates operator

Drukuj stronę

general saFety rules

Our compliments for your excellent choice. Your new

electromechanical barrier has been produced according to a

high quality and strict reliability, that's why it will assure you

long-lasting performance. This booklet will offer you all the

pieces of information you may need to install your barrier and

to safe guard your safety.

All our products have been made in conformity with the

regulations in force. We recommend using original part only,

during the installation and the upkeep. However, the caution

is unquestionably indispensable and nothing is better than

preventing accidents.

imporTanT

Any installation or repair, or adjustment of the working

machinery by unqualified people is strictly prohibited unless

all the necessary precautions: power supply disconnected

(included possible batteries). All moving mechanism must be

provided with suitable protections.

DASPI is not responsible for any possible damages or injuries

to people, object or animals, caused by any use not provided

for this booklet and/or any unauthorized modification of the

product. Keep scrupulously this booklet enclosing it with

technical brochure of installation in a suitable place well-know

by all the interested people. You have to operate the elimination

of the packing material (cardboard, plastic, polystyrene, etc.) in

conformity with the regulations in force, remembering that for

a child a plastic envelope could be extremely dangerous. You

have to teach the people employed in using the automation

EcurIty

EchANIsm

DIstANcE

IN mouVEmENt

producT

The gear motor LINEA has been planned and built in

order to opening swing gates with leaves length max 2,2

mt. and with a maximum weight of 150 kg. DASPI is not

responsible for any anomalous and different use of the

gear motor LINEA.

IMPORTANT: The gear motor LINEA is not provided with

mechanical clutch and must be installed with its DASPI

control panel or with a control panel provided with

electronic clutch.

use oF the automation

As the automation can be controlled from the distance

through a remote control, you must always check the

full efficiency of all the safety devices. We recommend

inspecting periodically (every 6 Month) by qualified people

the adjustment of the electronic clutch. If you need to

calibrate the protection consult the paragraph "Adjustment

of the electronical clutch" in the instruction booklet of the

electronic central unit.

english

o Not INstALL thE

LEctrIc shock

AutomAtIoN IN pLAcE fuLL

of ExpLosIVE moIsturEs

about the control and security systems of the installation.Don't

install this product in explosive places.

Upkeep

For any kind of upkeep, you have always to cut off the power

supply.

For a correct upkeep of the installation where you have installed

the gear motor LINEA follow carefully these instructions:

Clean periodically the photocells.

Checking by qualified people the electronic clutch (see the

paragraph "Installation of the electronic central unit").

Lubrificate periodically the guide and the wheel of the gate.

In case of malfunction going and seeing qualified people.

demoliTion

You have to operate the elimination of the materials in

conformity with the regulations in force. All material must be

divided by type (copper, aluminium, plastic, electrical central

unit). However there are not material considered dangerous for

the handler.

Dismantling

In order to dismantle or to move away the automation, follow

these instructions:

Cut off the power supply and disconnect the electrical

installation.

Dismantle the control console and all the other components of

the installation.

If you have noticed that some components have been damaged,

you have to replace them.

thE gLoVEs

preliminary checks

• Read carefully the instruction.

• Check that the product has not been damage during the

transport.

• Check that the gate structure is strong and that during its

movement there aren't friction points

• Check that the electrical installation is in accordance with

the characteristic required by the gear motor.

• Check that there is a suitable ground safety system and

that the metallic parts of the installation are connected.

• Check that the manual manoeuvre always is easily

practicable.

• Remember that the automation makes easy the use of

the gate but don't resolve the problems due to a defective

installation or to a faulty of upkeep.

lubriFication

The gear motor LINEA is provided with permanent

lubrification

sE gLAssEs

EEp thE protEctIoN

for WELDINg

cArtEr