DURKOPP ADLER 867 Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria do maszyn do szycia DURKOPP ADLER 867. DURKOPP ADLER 867 16 stron. Remaining thread monitor
Również dla DURKOPP ADLER 867: Instrukcje (4 strony), Instrukcja obsługi (16 strony), Instrukcja obsługi (8 strony), Dodatkowe instrukcje (18 strony), Dodatkowe instrukcje (20 strony)

Umbauanleitung für Bobbinengreifer CLB 300

Instructions for converting bobbin hook CLB 300

General information

Transformation

2.1 Disassembling the components / Mounting the hook

Ausgabe/Edition:

03.2007

867 190342

A conversion to the bobbin hook CLB 300 is only possible with

the class 867 190342.

Before proceeding with the conversion task:

Please make sure that you have all components of the kit.

The complete kit for the transformation of the bobbin hook with the

order no.: 0667 156224 consists of the following components:

1x Hook

1x Manual

Attention! Risk of injury!

Turn the main switch off and remove the plug before starting the

conversion.

The transformation may only be performed by qualified

technicians.

–

Remove the slide.

–

Remove the thread-pulling knife.

–

Remove the counter-knife.

–

Remove the throat plate.

–

Feed dog; remove the front screw and push it to the side.

–

Loosen loop fastening screws and remove the hook.

–

Insert the CLB-hook, tighten the fastening screws (first

screw in the direction of rotation on the flat spot).

Printed in Federal Republic of Germany

Teile-Nr./ Part-No.:

0791 867772

0667 156224

0791 867772

Blatt: 9

von 16

Sheet

from