DURKOPP ADLER 867 Talimatlar Kılavuzu - Sayfa 9
Dikiş Makinesi Aksesuarları DURKOPP ADLER 867 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. DURKOPP ADLER 867 16 sayfaları. Remaining thread monitor
Ayrıca DURKOPP ADLER 867 için: Talimatlar (4 sayfalar), Talimatlar Kılavuzu (16 sayfalar), Talimatlar Kılavuzu (8 sayfalar), Ek Talimatlar (18 sayfalar), Ek Talimatlar (20 sayfalar)
Sayfayı Yazdır
Umbauanleitung für Bobbinengreifer CLB 300
Instructions for converting bobbin hook CLB 300
1.
General information
1.1 Scope of delivery
2.
Transformation
2.1 Disassembling the components / Mounting the hook
Ausgabe/Edition:
03.2007
867 190342
A conversion to the bobbin hook CLB 300 is only possible with
the class 867 190342.
Before proceeding with the conversion task:
Please make sure that you have all components of the kit.
The complete kit for the transformation of the bobbin hook with the
order no.: 0667 156224 consists of the following components:
1x Hook
1x Manual
Attention! Risk of injury!
Turn the main switch off and remove the plug before starting the
conversion.
The transformation may only be performed by qualified
technicians.
–
Remove the slide.
–
Remove the thread-pulling knife.
–
Remove the counter-knife.
–
Remove the throat plate.
–
Feed dog; remove the front screw and push it to the side.
–
Loosen loop fastening screws and remove the hook.
–
Insert the CLB-hook, tighten the fastening screws (first
screw in the direction of rotation on the flat spot).
Printed in Federal Republic of Germany
Teile-Nr./ Part-No.:
0791 867772
0667 156224
0791 867772
Blatt: 9
von 16
Sheet
from