Datakom DKG-205 Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kontroler Datakom DKG-205. Datakom DKG-205 20 stron. Automatic mains failure unit

2. INSTALLATION

The control panel is designed to provide user friendliness for both the installer

and the user. Programming is usually unnecessary, as the factory settings

have been carefully selected to fit most applications. However programmable

parameters allow the complete control over the generating set. Programmed

parameters are stored in a Non Volatile Memory and thus all information is

retained even in the event of complete loss of power.

The unit is designed for panel mounting. The user should not be able to

access parts of the unit other than the front panel.

Mount the unit on a flat, vertical surface. The unit fits into a standard panel

meter opening of 140x68 millimeters. Before mounting, remove the steel

spring from the unit, and then pass the unit through the mounting opening.

The unit will be maintained in its position by the steel spring.

WARNING: THE UNIT IS NOT FUSED.

Use external fuses for

Install the fuses as nearly as possible to

the unit in a place easily accessible for the user.

The fuse rating should be 6 Amps.

WARNING: ELECTRICITY CAN KILL

ALWAYS disconnect the power BEFORE

Mains phases: R-S-T

Generator phase: L1-L2-L3

Battery positive: BAT(+).

connecting the unit.

- 4 -