Elseta IOMOD HT Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Akcesoria Elseta IOMOD HT. Elseta IOMOD HT 7 stron.
Również dla Elseta IOMOD HT: Podręcznik użytkownika (14 strony)

Drukuj stronę

5. Technical information

Dimensions

Case

Working environment

Working temperature

Recommended operating

conditions

Configuration

Firmware upgrade

Electrical Characteristics

Termination Resistor

Power supply

5-33VDC (full range)

Relays

Relay specifications

Basic

10.

Resistive load (cosφ=1)

Inductive load

11.

(cosφ=0.4, L/R=7ms)

Max. switching power

12.

6. Device Connection

IOMOD HT has integrated termination resistor which can be switched on or off over USB

configuration.

Recommended to switch on termination resistor on last device on RS485 line:

V0.6 | ELSETA | Technical information

IOMOD HT

12/17/2015

System

26 (H) x 71 (W) x 71 (L), mm

ABS, white

Indoors

-20 ÷ +70° C

5 – 60° C and 20 – 80%RH;

USB or Modbus

USB – mass storage device

Basic

Advanced

Selectable 120Ω

12-24VDC, 8mA

24VDC, 25mA (nominal);

(nominal);

18-27VDC (full range)

2 (Normally Open);

Advanced

5 A at 250 VAC, 5 A at 30

VDC

2 A at 250 VAC, 2 A at 30

VDC

1,250 VA, 150 W

7. Configuration over USB

a. Driver installation

Device requires USB drivers to work as virtual com port. First-time connection between device and

computer could result in "Device driver software was not successfully installed" error.

User then manually installs drivers by selecting downloaded driver folder:

Go to Control Panel -> Device Manager;

Select failed device;

Press "Update driver software"; following screen should appear:

Select "x86" driver for 32bit machine, or x64 for 64bit machine. If not sure, select root folder (folder

in which x64 and x86 lays inside).

IOMOD HT

V0.6 | ELSETA | Configuration over USB

12/17/2015