Elseta IOMOD HT Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Akcesoria Elseta IOMOD HT. Elseta IOMOD HT 7 stron.
Również dla Elseta IOMOD HT: Podręcznik użytkownika (14 strony)

Drukuj stronę

d. Firmware upgrade over USB

To update device firmware user must enter main configuration menu.

Enter Firmware update screen by pressing [4];

Confirm update by pressing [1];

Device now enters Firmware Upgrade mode.

It is recommended to close terminal window when entered firmware upgrade mode.

Device reconnects as mass storage device:

User then must delete existing file "firmware.bin", and simply upload new firmware file by drag and

drop.

Reconnect device, and check firmware version.

V0.6 | ELSETA | IOMOD HT configuration with PuTTY terminal

IOMOD HT

12/17/2015

e. Testing With "THE VINCI" software

To test IOMOD HT with default settings, user connects device through RS485 to Modbus master.

Example will show "The Vinci Expert" as serial interface converter and adapter to PC with "The

Vinci" software. Default settings for Modbus – 9600 baudrate; 8 data, no parity, 1 stop bit. When

opening "The Vinci" software, choose Modbus serial – Master mode. In settings tab, choose station

number (default – 1); configure tags (as described in section 2. Device working information); Press

start and go to "Statistic" tab:

V0.6 | ELSETA | IOMOD HT configuration with PuTTY terminal

IOMOD HT

12/17/2015