Elsner 10144 Opis techniczny, instrukcje instalacji - Strona 18
Przeglądaj online lub pobierz pdf Opis techniczny, instrukcje instalacji dla Kontroler Elsner 10144. Elsner 10144 20 stron. Radio control system
Również dla Elsner 10144: Działanie (13 strony)
Drukuj stronę
4.5.1. Layout of the circuit board
1
7
8
4.5.2. Mounting the weather station
Close the casing by placing the lid on the lower section. The lid must lock into place on
the right and left with a distinct click.
2
3
4 5
6
Latch
Solexa II Control • from software version 1.9
Version: 28.09.2016 • Technical changes and errors excepted.
18
Ill. 18
1
Cable connection to the precipita-
tion sensor in the casing lid
2
Drive connectors (spring loaded
terminal, PE/N/up/down), suitable
for solid conductors up to 1.5 mm²
or fine wire conductors
3
Opening for drive cable
4
Power supply connections (230 V
AC, spring loaded terminal, L1/N/
PE), suitable for solid conductors
up to 1.5 mm² or fine wire
conductors
5
Opening for power supply cable
6
Microfuse 6.3 A
7
LED programming
8
Programming button for teaching
the wireless connection to the
display
Ill. 19
Check that the lid and lower section have
properly latched into place! The diagram
shows the closed weather station from
below.
Installation/assembly