CB2 SAGA Instrukcja montażu - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Wyposażenie wnętrz CB2 SAGA. CB2 SAGA 5 stron. Credenza

Drukuj stronę
CB2 SAGA Instrukcja montażu
saga
CREDENZA
NOTE: Make sure cams of
side panels are positioned
as shown
left side
panel
middle
panel
NOTE: Make sure grooves
of left/right side panels are
assembled on the same side
as shown
Fit dowels of middle panel into corresponding
holes of left and right side panels as shown.
5
Secure all cams.
Attach 2 crossbars to 2 leg frames with 8 small
7
phillips bolts as shown, using a screwdriver.
Made in Vietnam - r08
right side
panel
crossbar
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
bottom panel
With assistance of another adult, attach 2 leg
frames to bottom panel with 4 allen bolts and 4
spring washers as shown, using an allen
6
wrench.
With assistance of another adult, fit dowels of
assembled unit into corresponding holes of
bottom panel as shown. Secure with 6 large
phillips bolts, 6 spring washers and 6 flat
8
washers as shown.
leg assembly
bottom panel
assembly
NOTE: Make sure grooves
of bottom panel are assembled
towards the front as shown
Page 3 of 5