ADE LW100-3 Instrukcja obsługi - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wagi ADE LW100-3. ADE LW100-3 20 stron. Electronic, price-computing calibrated retail scales

Users can choose to enable or disable the backlighting of the scale display. Activating the

backlighting makes it easier to read the weighing results, but at the same time leads to

increased power consumption.

The scale offers three different backlight setting options:

oFF:

The backlight is switched off permanently.

on:

The backlight is switched on permanently.

AUto:

The backlight switches on automatically when the weighing surface is

loaded or after pressing a key, or off again after a short period without

weight movement or pressing a key.

To set the backlight, follow the instructions below:

In the weighing mode, press and hold the

The displays "Weight" and " Price" show bLSET MODE. The display "Total" shows the

selected option.

You can change the setting by pressing the direct PLU keys

Confirm your setting by pressing the

key.

When the scale is turned off, the last settings you made will remain stored.

Disconnect the mains plug before cleaning the scale. Use only a damp cloth or an ordinary

disinfectant for cleaning. Do not use aggressive liquid cleaning agents, abrasive or acidic

detergents or white spirit.

Make sure that no liquid cleaning agent or water penetrates the scale and always follow the

manufacturer's instructions for use.

Below you will find a list of possible errors and faults. If necessary, these can be eliminated

with simple means. If the fault or error cannot be eliminated or other error messages occur,

please contact your service partner.

9. Backlight and parameter settings

key for approximately 2 seconds.

key or cancel the procedure by pressing the

LW100-210408-Rev002-UM-en