Frigicoll K05-KNX 01 A Instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Gateway Frigicoll K05-KNX 01 A. Frigicoll K05-KNX 01 A 15 stron. Hydraulic module knx gateway
Drukuj stronę
Bus interface: Power supply DC 29V, 10mA and connect to KNX bus;
KNX programming button: press once to enter the programming mode,
press it again will exit.
KNX programming statues lamp: when it is light up means programming
status and can write data to the module by KNX bus
RS485 communication ports: Communication port between KNX module
and indoor unit.(support 2nd generation DC indoor unit)
GW-KNX(A) - (K05-KNX 01 A) is completely in conformity with EIB/
KNX standard. ETS software must be used by integrator to carry out
configuration and project design. For detailed information of ETS software,
please contact knx association: www.knx.org.
ETS database (*.knxprod*) of GW-KNX(A) - (K05-KNX 01 A) can be
downloaded from our web site: http://cac.midea.com, or consult our
company.
3. Wiring installation instruction
The Wiring diagram follows,the GW-KNX(A) - (K05-KNX 01 A) connect to
the indoor Unit and KNX Power.
KNX TP-1
(EIB) bus
GW-KNX(A)
+ -
E
D2
D1
MAX 500m
6
.
E
D2
D1
indoor unit