Austlift 915100 Podręcznik użytkownika - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt bezpieczeństwa Austlift 915100. Austlift 915100 16 stron. Roofer's kit basic

Drukuj stronę

STEP 1 -

Fit A Suitable Full Body Harness as per AS/NZS1891.1

Inspect the harness to

ensure it is fit for use.

Locate the dorsal D-ring

of the harness and align it

in its correct orientation.

Fasten the chest strap

and adjust to ensure

the harness is fitting

correctly.

1300 100 120

AUSTLIFT ROOFER'S KIT

= BODY SUPPORT

Take out any twists in

the webbing. Slide the

harness on like wearing a

jacket. Place harness over

your shoulders.

Fit the right leg straps

ensuring the webbing

is sitting flat against

the legs. Then repeat

procedure on left leg.

Once fitted, adjust all

straps to ensure the

harness is fitted securely

to the body and get your

work mate to check it

over for you.

WARNING: Failing to

fit or maintain harness

properly may cause

serious injury or death.

www.austlift.com.au

Ensure

the

triangular

back section and D-ring

sits

between

should

blades in the centre of

the back.

Leg straps must be tight

but not restrictive, leg

straps that are too lose

could cause inury to the

wearer during a fall.

NOTICE: Please note

this instruction does not

replace or remove the

need for the end user

of all safety products to

undergo

competence

based training.