Cookshack FEC120 Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Piekarnik Cookshack FEC120. Cookshack FEC120 17 stron. Fast eddy oven

OPERATING INSTRUCTIONS

 Before starting check the following:

1. Pellet level

2. Insure that the fire pot is clean and clear of ash.

3. Check to insure that there is not a build –up of grease in the bottom of the cooking

chamber.

4. Make sure that the pellet slide is clean.

 Push the "START" button on the control panel. Unit has an automatic ignition system.

 In the event there should be a failure with the igniter system use the following manual

lighting instructions:

1. Pour ½ cup of pellets into the fire pot.

2. Squirt approximately 2 tablespoons of alcohol gel into the fire pot.

3. Ignite with a match.

embers. This has a potential for serious injury.

4. Let the pellets burn for 4 to 5 minutes.

5. Set the thermostat to 180 degrees.

 Always warm the oven to at least 180 degrees prior to cooking. This should take

approximately 10 to 15 minutes.

SELECTION OF FUEL

100% hardwood food-grade pellets should be used in your smoker. Pellets should be no

larger than ¼" in diameter and ¾" long. Use of heating fuel pellets can be harmful to both the

food you are cooking and your smoker.

Your Fast Eddy by Cookshack Model FEC120 has the new Cookshack IQ4 control system.

This controller has the same great cook & hold features as previous models of the IQ

controller, but with an additional feature that allows you to cook with a meat probe. This

optional probe plugs into the unit and allows you to set the internal temperature to

which you want the product cooked. If you did not purchase the meat probe with your

unit, call Cookshack Customer Service at (800) 423-0698 to order your probe.

NOTE: Never attempt to squirt alcohol gel into burning