Cookshack Smokette SM025 Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Palacze Cookshack Smokette SM025. Cookshack Smokette SM025 19 stron.

Assembly Continued

Install the Casters

In order to install the casters on the bottom of your smoker it must be

placed on its back. Two people should be a part of this process as

serious injury can occur if only conducted by one person. Please be

sure not to lay smoker on a surface that will scratch the metal. We

recommend that you find a carpeted area in order to install the casters.

Included in the box of casters is a wrench that will be necessary for

tightening them to the bottom. You will also find that there are two

locking casters as well as two non-locking casters. The locking casters

should be installed into the front two slots of the smoker and the

non-locking casters should be placed in the back two slots. Turn

all casters clockwise until they are fully screwed in so that the smoker

will be on a level surface. Return your smoker to the standing position.

Place the side racks and grill inserts back into your smoker.

Install the Control Head

First remove the 8 Phillips head screws from the top of the smoker that

align with the control head holes. Plug the control connectors into the

smoker (1 white and 1 yellow). Place the control head on top of smoker

aligning the holes and secure it in place with the 8 Phillips head screws.

Be careful not to over tighten the screws. The screws only need to be

tight enough to keep the control head secure.

Cookshack SM025/SM045 Operators Manual, V. 13