Cookshack Smokette SM025 Operatör El Kitabı - Sayfa 9
Sigara içenler Cookshack Smokette SM025 için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Cookshack Smokette SM025 19 sayfaları.
Assembly Continued
Install the Casters
In order to install the casters on the bottom of your smoker it must be
placed on its back. Two people should be a part of this process as
serious injury can occur if only conducted by one person. Please be
sure not to lay smoker on a surface that will scratch the metal. We
recommend that you find a carpeted area in order to install the casters.
Included in the box of casters is a wrench that will be necessary for
tightening them to the bottom. You will also find that there are two
locking casters as well as two non-locking casters. The locking casters
should be installed into the front two slots of the smoker and the
non-locking casters should be placed in the back two slots. Turn
all casters clockwise until they are fully screwed in so that the smoker
will be on a level surface. Return your smoker to the standing position.
Place the side racks and grill inserts back into your smoker.
Install the Control Head
First remove the 8 Phillips head screws from the top of the smoker that
align with the control head holes. Plug the control connectors into the
smoker (1 white and 1 yellow). Place the control head on top of smoker
aligning the holes and secure it in place with the 8 Phillips head screws.
Be careful not to over tighten the screws. The screws only need to be
tight enough to keep the control head secure.
Cookshack SM025/SM045 Operators Manual, V. 13