4tronix Ultimate Initio kit Podręcznik - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik dla Robotyka 4tronix Ultimate Initio kit. 4tronix Ultimate Initio kit 11 stron. For raspberry pi

Connect the Pan servo (bottom servo) to Pin 22 (marked x22 or #25)

Connect the Tilt servo (upper servo) to Pin 18 (marked x18 or #24)

Note the colours of the servo wires and ensure they are connected correctly:

Black: Gnd

•

Red: 5V

•

Orange or White: Signal

•

5. Connecting the Ultrasonic Sensor

For this you will need the mounting plate, saddle clamp and the final 2 of the 2.0x6PB screws

used in step 4

Push the 4-way 30cm female-female cable that you made in Step 3 onto the top of the

ultrasonic sensor:

Brown: Gnd

•

Red: Echo

•

Orange: Trig or Ping

•

Yellow: 5V or VCC

•