Bender ATICS DIO Series Skrócona instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Przełącznik Bender ATICS DIO Series. Bender ATICS DIO Series 13 stron. Automatic transfer switching devices for safety power supplies

Drukuj stronę
ATICS-...-DIO Quick start

6. Enabling automatic mode

7. Display in error-free operation

There is no alarm message. Standard display ATICS-2-DIO:
1
2
228V
1
0
50.0Hz
14:11
12.10.2010
There is no alarm message. Standard display ATICS-4-DIO:
1
2
228V
1
0
227V
229V
14:11
50.0Hz
12.10.2010
8. Display in fault condition
There is an alarm message:
• The yellow LED "Alarm" lights up.
• Information about the message appears on the display in the bottom line.
Example: Line 2 has no voltage
228V
1
0
2
50.0Hz
160kΩ
14:11
Undervoltage
228V
1
0
2
228V
228V
14:11
Undervoltage
ALARM
Undervoltage
0V
Addr.:3 Chan.:2
2
3
4
231V
2
50.0Hz
3
4
2
230V
229V
231V
50.0Hz
0.00V
ATICS-2-DIO
0.00Hz
35%
0.00V
ATICS-4-DIO
0.00V
0.00V
xx/yy
►
In order to enable automatic mode, close the transparent
cover of the automatic transfer switching device and seal it, if
necessary.
Pos. Meaning
1
Line 1: Measured values of mains voltage and frequency
2
Switch position of the automatic transfer switching device
3
Date and time
4
Line 2: Measured values of mains voltage and frequency
The device shows the alarm status for each measured value:
No alarm
Alarm
Alternate displays in the bottom line of the display
The device displays alarm messages in the bottom line of the display.
Also shown there are: switching back interlocking function, manual
mode, countdown timer for return transfer time.
►
Press "↵" to display the current alarm message.
The alarm message consists of:
– Line 1: Alarm
xx = Serial number of the displayed alarm
yy = Number of pending messages
Use the arrow buttons to select the next or previous mes-
sage.
– Line 2: Alarm status and alarm text
– Line 3: Measured value
– Line 4: Address and channel of device triggering the mes-
sage
►
If no button is pressed for a few seconds, the standard dis-
play reappears.
►
Press the Enter button again, then the main menu will
appear.
ATICS-DIO_D00080_02_Q_XXEN/04.2017