BENDIX ACTIVE STEERING SYSTEM Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria samochodowe BENDIX ACTIVE STEERING SYSTEM. BENDIX ACTIVE STEERING SYSTEM 8 stron.

Bendix™ AutoVue® FLC-20™ Camera: The AutoVue FLC-20 is a forward-facing

camera that tracks the lane markers and provides the lane characteristics for the

left and right marker to the Active Steering System by Bendix CVS. The system

also provides information on when the Lane Departure Warnings (LDW) will be

suppressed, allowing the Lane Keep Assist (LKA) feature to be suppressed at the

same time. The AutoVue FLC-20 camera is compatible with later versions of Bendix®

Wingman® Fusion™ Active Safety Systems. A windshield-mounted bracket holds the

camera secure and keeps it facing in the correct direction to successfully determine

lane width and position.

• For additional information, refer to SD-64-20124, Bendix™ AutoVue® FLC-20™

Camera Service Data Sheet, on b2bendix.com.

Active Steering Electronic Control Unit (ECU): The Active Steering System ECU is

a standalone unit designed to work with J1939 Vehicle CAN and a forward-facing

lane sensing camera.

NOTE: When replacing the steering gear, the ECU must be matched to the gear

at the factory. If ordering the ECU only, please provide the gear serial number and

vehicle VIN so the ECU can be flashed at the factory to match. When purchasing a

new steering gear, you must order a new steering gear and ECU set. The existing ECU

and steering gear must be returned to Bendix to receive core charge credit.

Magnetic Torque Overlay (MTO) Power Steering Gear: The MTO power steering

gear enables hydraulic steering.

•

For additional service and troubleshooting information, refer to the D-Series

Integral Power Steering Gear manual available online from the Customer Service

tab on RHSheppard.com.

Perform a visual inspection to ensure proper installation and functionality. The

power steering gear with MTO should be clean and free of fluid. All connectors

around the gear should be connected and secured.

System Components

IMPORTANT