BENDIX ACTIVE STEERING SYSTEM Operatör El Kitabı - Sayfa 6
Otomobil Aksesuarları BENDIX ACTIVE STEERING SYSTEM için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. BENDIX ACTIVE STEERING SYSTEM 8 sayfaları.
Sayfayı Yazdır
Bendix™ AutoVue® FLC-20™ Camera: The AutoVue FLC-20 is a forward-facing
camera that tracks the lane markers and provides the lane characteristics for the
left and right marker to the Active Steering System by Bendix CVS. The system
also provides information on when the Lane Departure Warnings (LDW) will be
suppressed, allowing the Lane Keep Assist (LKA) feature to be suppressed at the
same time. The AutoVue FLC-20 camera is compatible with later versions of Bendix®
Wingman® Fusion™ Active Safety Systems. A windshield-mounted bracket holds the
camera secure and keeps it facing in the correct direction to successfully determine
lane width and position.
• For additional information, refer to SD-64-20124, Bendix™ AutoVue® FLC-20™
Camera Service Data Sheet, on b2bendix.com.
Active Steering Electronic Control Unit (ECU): The Active Steering System ECU is
a standalone unit designed to work with J1939 Vehicle CAN and a forward-facing
lane sensing camera.
NOTE: When replacing the steering gear, the ECU must be matched to the gear
at the factory. If ordering the ECU only, please provide the gear serial number and
vehicle VIN so the ECU can be flashed at the factory to match. When purchasing a
new steering gear, you must order a new steering gear and ECU set. The existing ECU
and steering gear must be returned to Bendix to receive core charge credit.
Magnetic Torque Overlay (MTO) Power Steering Gear: The MTO power steering
gear enables hydraulic steering.
•
For additional service and troubleshooting information, refer to the D-Series
Integral Power Steering Gear manual available online from the Customer Service
tab on RHSheppard.com.
Perform a visual inspection to ensure proper installation and functionality. The
power steering gear with MTO should be clean and free of fluid. All connectors
around the gear should be connected and secured.
System Components
IMPORTANT
6