BENDIX VORAD VS-500 Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria samochodowe BENDIX VORAD VS-500. BENDIX VORAD VS-500 12 stron. Ups package car drivers
Również dla BENDIX VORAD VS-500: Instrukcja obsługi (16 strony)

Drukuj stronę

System Responses

This chart lists the system response to specific driver actions.

If You Do This:

Step on the brake

any time.

Step aggressively

on the accelerator

during an event.

Step on the

accelerator when

in cruise.

Switch ON the

cruise control.

Switch OFF the

cruise control.

Set the cruise

control speed.

Pass a vehicle or

change lanes.

Cover or block the

radar.

Use normal cruise

control +/- switch.

NOTE: These are examples of driver actions and typical system

responses. The chart does not attempt to cover all possible situations.

The System Responses Are:

The driver is always able to apply full braking force

(assuming a properly maintained vehicle).

The driver's actions override system actions. Press

the accelerator to override the cruise control. When

released, the cruise control resumes set speed.

The cruise control is overridden until the accelerator is

released; then cruise control resumes the original set

speed automatically.

None. The Bendix

™

control system will not engage until the cruise control

speed is set. System alerts are available.

The SmartCruise system turns off. System alerts are still

available.

The SmartCruise system is automatically activated. Your

vehicle maintains the set speed and following distance

behind the vehicle ahead.

The vehicle in front, still in the lane being exited, is no

longer detected by the radar.

The system performance is diminished or disabled. A

Diagnostic Trouble Code (DTC) is set. Blocking the

radar may affect the cruise control availability.

Vehicle speed increased (+) or reduced (-) to set the

new speed and maintain a following distance with the

vehicle ahead, if it is within 300 feet.

SmartCruise

adaptive cruise