BENDIX VORAD VS-500 Посібник оператора - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник оператора для Автомобільні аксесуари BENDIX VORAD VS-500. BENDIX VORAD VS-500 12 сторінок. Ups package car drivers
Також для BENDIX VORAD VS-500: Посібник оператора (16 сторінок)
Друкувати сторінку
System Responses
This chart lists the system response to specific driver actions.
If You Do This:
Step on the brake
any time.
Step aggressively
on the accelerator
during an event.
Step on the
accelerator when
in cruise.
Switch ON the
cruise control.
Switch OFF the
cruise control.
Set the cruise
control speed.
Pass a vehicle or
change lanes.
Cover or block the
radar.
Use normal cruise
control +/- switch.
NOTE: These are examples of driver actions and typical system
responses. The chart does not attempt to cover all possible situations.
The System Responses Are:
The driver is always able to apply full braking force
(assuming a properly maintained vehicle).
The driver's actions override system actions. Press
the accelerator to override the cruise control. When
released, the cruise control resumes set speed.
The cruise control is overridden until the accelerator is
released; then cruise control resumes the original set
speed automatically.
None. The Bendix
™
control system will not engage until the cruise control
speed is set. System alerts are available.
The SmartCruise system turns off. System alerts are still
available.
The SmartCruise system is automatically activated. Your
vehicle maintains the set speed and following distance
behind the vehicle ahead.
The vehicle in front, still in the lane being exited, is no
longer detected by the radar.
The system performance is diminished or disabled. A
Diagnostic Trouble Code (DTC) is set. Blocking the
radar may affect the cruise control availability.
Vehicle speed increased (+) or reduced (-) to set the
new speed and maintain a following distance with the
vehicle ahead, if it is within 300 feet.
9
SmartCruise
adaptive cruise
®