BENDIX TU-FLO 750 COMPRESSOR Dane usługi

Przeglądaj online lub pobierz pdf Dane usługi dla Sprężarka powietrza BENDIX TU-FLO 750 COMPRESSOR. BENDIX TU-FLO 750 COMPRESSOR 16 stron.

Drukuj stronę

Bendix

Tu-Flo

DISCHARGE

VALVE STOP

DISCHARGE

VALVE

DISCHARGE

VALVE SEAT

CRANKCASE

PISTON RINGS

CONNECTING

ROD

CRANKSHAFT

BENDIX

TU-FLO

(CROSS SECTION)

DESCRIPTION

The function of the air compressor is to provide and main-

tain air under pressure to operate devices in the air brake

and/or auxiliary air systems. The Tu-Flo

is a two cylinder single stage, reciprocating compressor

with a rated displacement of 16.5 cubic feet per minute

at 1,250 RPM.

The compressor assembly consists of two major

subassemblies, the cylinder head and the crankcase. The

cylinder head is an iron casting which houses the inlet,

discharge, and unloader valving. (See Figure 1.) The

cylinder head contains the air inlet port and is designed

with both top and side air discharge ports. Three water

coolant ports provide a choice of coolant line connections.

Governor mounting surfaces are provided at both the front

and the rear of the cylinder head. The head is mounted

on the crankcase and is secured by six cap screws. The

Tu-Flo

750 compressor is designed such that the cylinder

head can be installed in one of two positions which are 180

degrees apart. The crankcase houses the cylinder bores,

pistons, crankshaft and main bearings, and provides the

ﬂ ange or base mounting surface.

750 Air Compressor

UNLOADER

COVER

DISCHARGE

VALVE SPRING

750 AIR COMPRESSOR

750 compressor

AIR DISCHARGE

WATER

INLET

GOVERNOR

MOUNTING

PAD

PISTON

BENDIX

CYLINDER

HEAD

END VIEW OF CYLINDER HEAD

CYLINDER

HEAD

TU-FLO

750 AIR COMPRESSOR

(EXTERIOR)

UNLOADER

WATER OUTLET

AIR INLET

CRANKCASE

PIECE NO.

TAG

INLET VALVE

SEAT

INLET

INLET VALVE

SPRING