BENDIX TU-FLO 750 COMPRESSOR Сервісні дані
Переглянути онлайн або завантажити pdf Сервісні дані для Повітряний компресор BENDIX TU-FLO 750 COMPRESSOR. BENDIX TU-FLO 750 COMPRESSOR 16 сторінок.
Друкувати сторінку®
Bendix
®
Tu-Flo
®
DISCHARGE
VALVE STOP
DISCHARGE
VALVE
DISCHARGE
VALVE SEAT
CRANKCASE
PISTON RINGS
CONNECTING
ROD
CRANKSHAFT
BENDIX
®
TU-FLO
(CROSS SECTION)
DESCRIPTION
The function of the air compressor is to provide and main-
tain air under pressure to operate devices in the air brake
and/or auxiliary air systems. The Tu-Flo
is a two cylinder single stage, reciprocating compressor
with a rated displacement of 16.5 cubic feet per minute
at 1,250 RPM.
The compressor assembly consists of two major
subassemblies, the cylinder head and the crankcase. The
cylinder head is an iron casting which houses the inlet,
discharge, and unloader valving. (See Figure 1.) The
cylinder head contains the air inlet port and is designed
with both top and side air discharge ports. Three water
coolant ports provide a choice of coolant line connections.
Governor mounting surfaces are provided at both the front
and the rear of the cylinder head. The head is mounted
on the crankcase and is secured by six cap screws. The
®
Tu-Flo
750 compressor is designed such that the cylinder
head can be installed in one of two positions which are 180
degrees apart. The crankcase houses the cylinder bores,
pistons, crankshaft and main bearings, and provides the
fl ange or base mounting surface.
750 Air Compressor
UNLOADER
COVER
DISCHARGE
VALVE SPRING
®
750 AIR COMPRESSOR
®
750 compressor
AIR DISCHARGE
WATER
INLET
GOVERNOR
MOUNTING
PAD
PISTON
BENDIX
CYLINDER
HEAD
END VIEW OF CYLINDER HEAD
CYLINDER
HEAD
®
TU-FLO
®
750 AIR COMPRESSOR
(EXTERIOR)
UNLOADER
WATER OUTLET
AIR INLET
CRANKCASE
PIECE NO.
TAG
INLET VALVE
INLET VALVE
SEAT
INLET
INLET VALVE
SPRING
1