AirCom 50TH.2 HVLP Series Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Rozpylacz farby AirCom 50TH.2 HVLP Series. AirCom 50TH.2 HVLP Series 19 stron. Conventional spray guns

Drukuj stronę

50TH.2 series

TROUBLESHOOTING

Anomaly

No atomization

Leakage from the

nozzle

10 - Instruction Manual

Problem / Solution

No pressure is getting to the gun

Check air system

Valve part. [1007- 43] worn out Replace

valve part. [1007-43] worn out

The head part. [1268-53] or [1268-79], the

nozzle part. [1268-52] or [1268-73], and the

needle part. [1268-54] are worn out.

Replace the head part. [1268-53] or [1268-79], the

nozzle part. [1268-52] or [1268-73] and the needle

part. [1268-54] worn out.

The product is exceeding the amount needed

Reduce the product passage

Lack of product (flow rate too low)

Add product or reduce atomization air

pressure

Missing product in tank or clogged pipes Fill

tank or clean up with solvent

Mounted handwheel part. [1268-63] worn out

Replace mounted handwheel part. [1268-63] worn

out

Needle part. [1268-54] / nozzle

part. [1268-52] or [1268-73] worn out

Replace needle part. [1268-54]/

nozzle part. [1268-52] or [1268-73] worn out

aircom.it