Dymo RhinoPRO 6000 Podręcznik użytkownika - Strona 6
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Urządzenie do tworzenia etykiet Dymo RhinoPRO 6000. Dymo RhinoPRO 6000 17 stron. Electronic labelmaker
Również dla Dymo RhinoPRO 6000: Skrócona instrukcja obsługi (2 strony)
Drukuj stronę
Preparing for use
Unpacking
Power Supply
6
Remove the Labelmaker from the packaging carefully; observe any
warnings or packaging information. Retain all packaging for
possible future use.
The internal batteries will have been partially charged during
manufacture.
IMPORTANT: For maximum battery life, the internal batteries
should be charged for AT LEAST 24 hours before using the
machine on battery power for the first time.
Connect the round plug from the AC adaptor into the power input
socket on the Labelmaker (see Fig. 1), then plug the AC adaptor
into a convenient wall socket. Switch on at the wall socket and
leave it on charge for AT LEAST 24 hours.
You can use the Labelmaker with power from the AC adaptor
during the initial 24-hour charging period.
Connect the AC
adaptor plug here
Fig. 1 — Rear/underside view
External interface
socket
®
DYMO
6000 Labelmaker