Dymo RhinoPRO 6000 Podręcznik użytkownika - Strona 7
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Urządzenie do tworzenia etykiet Dymo RhinoPRO 6000. Dymo RhinoPRO 6000 17 stron. Electronic labelmaker
Również dla Dymo RhinoPRO 6000: Skrócona instrukcja obsługi (2 strony)
Drukuj stronę
External
Interface
Socket
®
DYMO
6000 Labelmaker
Battery life
When used away from the AC adaptor, the internal batteries will
provide up to four hours of keyboard operation (editing or creating
labels) or enough power to print up to two tape cassettes. Any
labels stored in the memory will be retained for up to six weeks on
a full charge.
AC adaptor
The Labelmaker can be connected to the AC supply, using the AC
adaptor, for continuous operation. The AC adaptor will also charge
the internal batteries all the time it is connected to the AC supply. If
you have been using the Labelmaker from battery power, re-
connect it to the AC adaptor after use to ensure that the batteries
are always fully charged. Note that the batteries cannot be
overcharged.
The external interface socket at the rear of the Labelmaker enables
you to plug in a range of optional cartridges.
DO NOT ATTEMPT TO CONNECT ANYTHING OTHER
THAN AN APPROVED DYMO CARTRIDGE FOR THE 6000
ELECTRONIC LABELMAKER TO THE EXTERNAL
INTERFACE SOCKET.
7