Active Products XE03 Instrukcja obsługi - Strona 16

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Myjka ciśnieniowa Active Products XE03. Active Products XE03 19 stron.

CLEANING AND MAINTENANCE

Connections

Connections on pressure washer hoses; gun and spray wand should be cleaned regularly

and lubricated with non-water soluble grease.

Clogging of the spray tips causes the pump

pressure to be too high and cleaning is im-

mediately required. You can clean the spray

the tip to rid it of deposits.

The pressure washer is equipped with a wa-

ter inlet screen to protect the pump. If the

to the pressure washer will be restricted

and the pump may be damaged.

quick-connector and remove the ﬁlter

screen from the pump inlet.

2. Rinse screen until it is free of debris

and blockage.

3. Replace screen and quick-connector im-

mediately to prevent any foreign matter

from entering the pump.