Active Products XE03 Kullanıcı El Kitabı - Sayfa 16

Basınçlı Yıkama Active Products XE03 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Active Products XE03 19 sayfaları.

CLEANING AND MAINTENANCE

Connections

Connections on pressure washer hoses; gun and spray wand should be cleaned regularly

and lubricated with non-water soluble grease.

Clogging of the spray tips causes the pump

pressure to be too high and cleaning is im-

mediately required. You can clean the spray

the tip to rid it of deposits.

The pressure washer is equipped with a wa-

ter inlet screen to protect the pump. If the

to the pressure washer will be restricted

and the pump may be damaged.

quick-connector and remove the ﬁlter

screen from the pump inlet.

2. Rinse screen until it is free of debris

and blockage.

3. Replace screen and quick-connector im-

mediately to prevent any foreign matter

from entering the pump.