Gage Bilt GB713 Instrukcja instalacji - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Elektronarzędzie Gage Bilt GB713. Gage Bilt GB713 14 stron.
Również dla Gage Bilt GB713: Oryginalna instrukcja obsługi (18 strony), Oryginalna instrukcja obsługi (20 strony)

HEAD

WARNING:

Dispose of hydraulic oil in accordance with all environmental regulations applicable in your area.

Remove nose assembly from tool before attempting disassembly of head assy.

Remove end cap (713217). Push against threaded end of piston (713211) to slide it out of head cylinder assy (713121). Be careful not

to damage threads or cause burrs on polished piston (713211) surface.

The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite® #242 and torque

the four button-head cap screws (402479) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).

7/11 REV 10/14