Gage Bilt GB713 Kurulum Kılavuzu - Sayfa 10

Elektrikli Alet Gage Bilt GB713 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Gage Bilt GB713 14 sayfaları.
Ayrıca Gage Bilt GB713 için: Orijinal Talimat Kılavuzu (18 sayfalar), Orijinal Talimat Kılavuzu (20 sayfalar)

Sayfayı Yazdır
Gage Bilt GB713 Kurulum Kılavuzu
HEAD
WARNING:
Dispose of hydraulic oil in accordance with all environmental regulations applicable in your area.
Remove nose assembly from tool before attempting disassembly of head assy.
Remove end cap (713217). Push against threaded end of piston (713211) to slide it out of head cylinder assy (713121). Be careful not
to damage threads or cause burrs on polished piston (713211) surface.
The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite® #242 and torque
the four button-head cap screws (402479) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).
7/11 REV 10/14
10