GAGEMAKER CA-9001 Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe GAGEMAKER CA-9001. GAGEMAKER CA-9001 12 stron. Coupling alignment gage

Coupling Alignment Gage Operation Manual

3. Use a marker to draw a line inside of the

coupling.

NOTE: This line will be used as a timing mark.

4. Use a marker to mark the center of the

coupling.

5. Mark the thread that is 1.500 in. from the

center of the coupling.

IMPORTANT: This mark will be used to properly

position the center of the coupling between the

contact points of the CA-9001 as mandated by

API Specification 5B Section 5.1.35.

CA-9001