GAGEMAKER CA-9001 Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe GAGEMAKER CA-9001. GAGEMAKER CA-9001 12 stron. Coupling alignment gage

Coupling Alignment Gage Operation Manual

6. Place the coupling on a table or surface and

position it on its side.

NOTE: The table or surface needs to have

enough room for the coupling to roll one complete

revolution.

IMPORTANT: Proper Personal Protective

Equipment (PPE) such as steel toed boots should

be worn during the inspection of the coupling to

prevent injuries from falling objects.

7. Position the CA-9001 by placing the two fixed

contact points into the thread groove marked

in Step 5 (1.500 in. from center). Ensure that

all of the contact points are seated in the

proper thread grooves.

8. Zero the gage by adjusting the bezel.

CA-9001