Great Little Trading L1420 Podręcznik - Strona 4
Przeglądaj online lub pobierz pdf Podręcznik dla Wyposażenie wnętrz Great Little Trading L1420. Great Little Trading L1420 8 stron. Northcote divider unit
Drukuj stronęAssembly
#1
#3
STEP 1:
Lay the 2 x side panels (C) on a clean flat surface with the drill
holes and groove facing up, in the position shown.
Hardware for Step 1:
Insert 4 x wooden dowels (#3) into the drill holes in the four
corners of BOTH side panels (C). Ensure they are pushed in as
far as they will go.
8x #1 Cam Dowels
Insert 4 x cam dowels (#1) into the drill holes next to the
wooden dowels on BOTH panels (C), tighten with a screw
driver.
NB: Wooden dowels should fit snuggly and push in with your fingers. Do not use force or a
hammer as the wood may split.
8x #3 Wooden Dowels
C
left
A
Ensure that each cam lock's arrow is
pointing towards the drill hole on the side
edge of the component.
STEP 2:
Take the unit top (A) and unit base (B) and place them on a clean
flat surface with the drill holes facing up.
Insert the 8x cam locks (#2) into the drill holes.
Ensure that each cam lock's arrow is pointing towards the drill hole
on the side edge of the component.
4
#2
B
Hardware for Step 2:
8x #2 Cam Locks