Great Little Trading L1420 Manuel - Sayfa 4

İç Mekan Mobilyaları Great Little Trading L1420 için çevrimiçi göz atın veya pdf Manuel indirin. Great Little Trading L1420 8 sayfaları. Northcote divider unit

Sayfayı Yazdır

Assembly

STEP 1:

Lay the 2 x side panels (C) on a clean flat surface with the drill

holes and groove facing up, in the position shown.

Hardware for Step 1:

Insert 4 x wooden dowels (#3) into the drill holes in the four

corners of BOTH side panels (C). Ensure they are pushed in as

far as they will go.

8x #1 Cam Dowels

Insert 4 x cam dowels (#1) into the drill holes next to the

wooden dowels on BOTH panels (C), tighten with a screw

driver.

NB: Wooden dowels should fit snuggly and push in with your fingers. Do not use force or a

hammer as the wood may split.

8x #3 Wooden Dowels

left

Ensure that each cam lock's arrow is

pointing towards the drill hole on the side

edge of the component.

STEP 2:

Take the unit top (A) and unit base (B) and place them on a clean

flat surface with the drill holes facing up.

Insert the 8x cam locks (#2) into the drill holes.

Ensure that each cam lock's arrow is pointing towards the drill hole

on the side edge of the component.

Hardware for Step 2:

8x #2 Cam Locks