Great Little Trading Lulworth Podręcznik - Strona 10
Przeglądaj online lub pobierz pdf Podręcznik dla Wyposażenie wnętrz Great Little Trading Lulworth. Great Little Trading Lulworth 13 stron. Chest of drawers
Również dla Great Little Trading Lulworth: Podręcznik (15 strony), Podręcznik (7 strony)
Drukuj stronę
STEP 11:
Take the 2x back panels
(G) and place them within
the recessed groove of the
unit frame ensuring that
the pilot holes on panels
(G) line up with the drill
holes in the unit.
#11
Once in place, secure with
12x screws (#11) as shown.
Please note that the 2x pilot
F
holes indicated at the top
corners of the unit are to
attach the anti-tip straps
included separately with this
item to secure the unit to the
wall. See Step 20.
Hardware for Step 11:
12x #11 Screws (16mm)
STEP 12:
Prepare the large drawers by inserting 4x cam dowels (#7) to EACH of
the 2x large drawer fronts (I). Then attach 2x handles (#14) to EACH
of the large drawer front panels using 2x screws (#13) as shown using
your Philips screwdriver.
Hardware for Step 12:
8x #7 Cam Dowels
4x #13 Flat-Ended Screws
(24mm)
4x #14 Handles
#11
#11
#11
#11
#11
#11
G
#11
G
#11
#11
#11
A
B
D
#13
#7
#13
I
#7
#14
#14
STEP 13:
Take 1x LH drawer side panel (J) and attach 1x runner (#4) with 3x
screws (#12) ensuring that you are positioning all screws through the
indicated holes.
Note: The runner will fit the full length of the panel and should be positioned
with the wheel at the end next to the 2 small drill holes as shown. It should
NOT be on the side with the groove.
#11
REPEAT with the remaining 3x panels (J).
C
Hardware for Step 13:
4x #4 LH L-Shaped Runners
12x #12 Screws (12mm)
STEP 14:
Take 1x RH drawer side panel (K) and attach 1x runner (#3) with 3x
screws (#12) ensuring that you are positioning all screws through the
indicated holes.
Note: The runner will fit the full length of the panel and should be positioned
with the wheel at the end next to the 2 small drill holes as shown. It should
NOT be on the side with the groove.
#7
REPEAT with the remaining 3x panels (K).
#7
Hardware for Step 14:
4x #3 RH L-Shaped Runners
12x #12 Screws (12mm)
10
#12
#4
#12
#12
#12
J
#12
#12
#12
#12
K
#3
#12
#12
#4
#12
#3
#12