Dynabrade 40610 Podręcznik

Przeglądaj online lub pobierz pdf Podręcznik dla Narzędzia Dynabrade 40610. Dynabrade 40610 4 stron. Abrasive belt tool
Również dla Dynabrade 40610: Obsługa i konserwacja (4 strony)

Drukuj stronę

Electric Dynafile

Abrasive Belt Tool

Safety, Operation and Maintenance – Save This Document and Educate All Personnel

Model

RPM

Volts (Amps) Abrasive Range

40610

10,500

40611

SANDER / POLISHER

Find The Most Current Offering of Support Documents and Accessories at www.Dynabrade.com

Read and understand this tool manual before operating your tool. Follow all safety rules for the protection of operating personnel as well

as adjacent areas. Always operate, inspect, and maintain this tool in accordance with the International Electrotechnical Commission (IEC)

62841 series. For Safety information, refer to Code of Federal Regulation – CFR 29 Part 1910 and applicable State and Local Regulations

Read and understand tool manual before work starts

to reduce risk of injury to operator, visitors, and tool.

Ear protection to be worn when exposure to sound,

exceeds the limits of applicable Federal, State or

local statues, ordinances and/or regulations.

Respiratory protection to be used when exposed to

contaminants that exceed the applicable threshold

limit values required by law.

Some dust created by sanding, grinding, drilling, and other construction activities contain chemicals known to cause cancer, birth defects

or other reproductive harm. Some examples of these chemicals are:

• Lead from lead-based paints

• Crystalline silica from bricks and cement and other masonry products

• Arsenic and chromium from chemically treated lumber

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well

ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

Caution: Hand, wrist and arm injury may result from repetitive work, motion and overexposure to vibration.

Tool Intent: Dynabrade Electric Dynafile

Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

WARNING

The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Work Area safety

1. Keep your work area clean and well lit. Cluttered or dark areas invite accidents.

2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which ignite

the dust or fumes.

3. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical Safety

1. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified

plugs and matching outlets will reduce risk of electric shock.

2. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is

earthed or grounded.

3. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

4. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric shock.

120 (7.0)

1/4-3/4" x 18-34"

II used to sand, debur, blend and polish; metal, wood, stone, fiberglass or plastic surfaces.

GENERAL POWER TOOL SAFETY WARNINGS

SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE

Offering

Standard

Versatility Kit

WARNING

Eye protection must be worn at all times,

eye protection to conform to ANSI Z87.1.

Practice safety requirements. Work alert, have proper

attire, and do not operate tools under the influence

of alcohol or drugs.

Electric shock hazard. Avoid bodily contact with

grounded objects, bodies of water.

Do not damage cord set.

(continued on next page)

Supersedes PD15.20R

For Serial No. FC15000B and Higher

PD20-03

July, 2022