Dynabrade 40610 Podręcznik - Strona 4
Przeglądaj online lub pobierz pdf Podręcznik dla Narzędzia Dynabrade 40610. Dynabrade 40610 4 stron. Abrasive belt tool
Również dla Dynabrade 40610: Obsługa i konserwacja (4 strony)
Drukuj stronę
MACHINE SPECIFICATIONS
Model
Speed
All Models
10,500 RPM
Additional Specifications: Abrasive Belt Size is 1/4"-3/4" (6-19 mm) W x 18"-34" (457-863 mm)
Visit dynabrade.com for your model's current vibration and sound data.
OPTIONAL ACCESSORIES/SPECIALTY REPAIR TOOL
Optional Replacement Motor Assembly
•
Includes only the motor, does not include: 40759
Belt Housing Assembly, contact arm or drive wheel.
Part No. 40605
CONTACT ARMS FOR 4" TO 12" WORKABLE REACH
Strap polish here
tapered
REFERENCE CONTACT INFORMATION
American National Standards Institute (ANSI)
www.ansi.org
Compressed Air & Gas Institute (CAGI)
www.cagi.org
DYNABRADE, INC.
8989 Sheridan Drive • Clarence, NY 14031-1419 • Phone: (716) 631-0100 • Fax: 716-631-2073 • International Fax: 716-631-2524
© DYNABRADE, INC., 2022
Power
Voltage
750 W
120 V (AC)
•
Work on broad areas, leaves
in-line scratch, blend stainless.
Part No. 11200
Belt Size: 1/2" W x 18" L.
Contact Wheel: 5/8" dia. x 3/8" W, rubber.
Platen: 1/2" wide.
•
45 PSI maximum. Enter channels
as small as 7/16".
Part No. 11201
Belt Size: 1/2" W x 18" L.
Contact Wheel: 5/16" dia. x 3/8" W, steel.
Platen: 1/2" wide.
•
Grind over contact wheel or platen.
Part No. 11203*
Order 11312 for heavy-duty version.
Belt Size: 1/2" W x 18" L.
Contact Wheel: 5/8" dia. x 3/8" W, rubber.
Platen: 1/2" wide.
•
Strap polish is easy with this arm!
Part No. 11204 "Unique Offset Design"
Belt Size: 1/4" or 1/2" W x 18" L.
Contact Wheel: 1" dia. x 3/8" W, rubber.
Platen: None due to offset design.
Part No. 11206*
Order 11326 for Heavy Duty/Steel
Construction version.
Belt Size: 5/8" or 3/4" W x 18" L.
Contact Wheel: 3/4" dia. x 5/8" W, rubber.
Platen: 3/4" wide.
•
Grind corners, enter grooves, strap polish.
Part No. 11280
Belt Size: 1/4" W x 18" L.
Contact Wheel: 1" dia. x 3/8" W,
urethane, tapered.
Platen: No platen due to offset design.
European Committee for Standardization (PNEUROP)
www.pneurop.org
International Organization of Standards (ISO)
www.iso.org
Current
Phase
Frequency
7 Amp
1
60 Hz
Ultra Grease
•
High film strength; excellent resistance to water, steam, etc.
•
Workable range 0° F to 300° F.
Part No. 95544: 2.5 oz
www.dynabrade.com
Max SFPM
Weight
(SMPM)
Pound (kg)
2,400 (732)
5 (2.3)
•
Optional 40078 Adapter allows use of 24" long belts;
extends reach to 7" when used with contact arm.
*11024 steel platen available. 6-3/4" workable reach.
Part No. 11286
Belt Size: 1/2" W x 24" L.
Contact Wheel: 5/8" dia. x 3/8" W, rubber.
Platen: 1/2" wide.
•
Grind on contact wheel or platen;
has 5-1/4" workable reach.
Part No. 11287* (Uses 20-1/2" Belts)
Belt Size: 5/8" or 3/4" W x 20-1/2" L.
Contact Wheel: 3/4" dia. x 5/8" W, rubber.
Platen: 3/4" wide.
•
Work on broad areas; leaves in-scratch;
Rubber
blend stainless
Part No. 11304 "The Banana Arm"
Belt Size: 1/2" W x 18" L.
Contact Wheel: 5/8" dia. x 3/8" W, rubber.
Platen: 1/2" wide.
•
Removes raised material within .020" or less
without undercutting.
Part No. 11322 Guide-Cut
Belt Size: 1/2" W x 18" L. 60 to 80 grit.
Contact Wheel: 5/8" dia. x 3/8" W, rubber.
•
Excellent for cleaning oxide off electrical bus
bars. Arm has 12" workable reach.
Part No. 11350* "Bus Bar"
Belt Size: 3/4" W x 34" L.
Contact Wheel: 5/16" dia. x 5/8" W, steel.
Platen: 3/4" wide, optional.
•
Offset design & miniature contact wheels. 2" strap polish
in offset area; polish turbine blades & other contours.
Part No. 11220*, 11300*, 11301*, 11341*
Polish Turbine Blades
Belt Size: 11220 uses 5/8" or 3/4" W x 18" L.
All others use 1/2" W x 18" L
Contact Wheels description for each above arm:
11220: 5/16" dia. x 5/8" W, steel.
11301: 5/16" dia. x 3/8" W, steel.
U.S. Government Publishing Office (GPO)
www.gpo.gov
Length
Height
Inch (mm)
Inch (mm)
19 (483)
5.5 (140)
11300: 1/4" dia. x 3/8" W, steel.
11300: 5/16" dia. x 3/8" W, rubber.